加入收藏
網站地圖
您現在所在的位置：首頁 > 新聞中心
發布者：admin 點擊：2787
耐磨陶瓷和陶瓷同屬于陶瓷，采用多元復合原理，進行固化劑的復配。與主劑反應后提高固化物在耐溫性和高溫工況下的耐老化性、耐磨蝕性。多元樹脂復配。采用環氧樹脂、酚醛環氧樹脂，有機硅樹脂、DBT-7增韌劑按適當比例共混，達到大發揮各種樹脂性能。
施工工藝性能得到了極大的改善，如BD181耐磨陶瓷粘貼膠可在不用磁鐵及其他支撐措施的條件下在設備立面和頂棚進行施工，滿足了不同環境工況下的施工要求的性能指標。耐溫性、耐老化性等指標趕上并超過了部分進口耐磨陶瓷粘貼膠粘劑。如BD400高溫膠大可耐450℃高溫，BD1200高溫膠適用于1200℃工況下粘固。（圖/文www.tuizz.cn）
中譯英：
Wear resistant ceramic and ceramic belong to the ceramic, using multivariate composite principle, curing agent complex. And the main agent response after improving curing compounds in temperature and the working condition of high temperature resistance to aging, wear and corrosion resistance. Polyester resin compound. Using epoxy resin, phenolic epoxy resin, silicone resin, toughening agent blend DBT-7 in proper proportions, reached the maximum play a variety of resin properties.
Construction technology of performance has been greatly improved, such as BD181 wear-resistant ceramic adhesive in using a magnet and other supporting measures under conditions of equipment in the facade and roof construction, to meet the different environmental condition of construction performance requirements. Temperature resistance, aging and other indicators to catch up with and surpass of some imported wear resistant ceramic paste adhesive. As of BD400 high temperature adhesive is resistant to high temperature of 450 ℃maximum, BD1200 high temperature glue is applied to 1200 ℃condition cements.